Raven AccuBoom Installation Manual page 6

Automatic on-off control for up to 10 sections

Hide thumbs Also See for AccuBoom:

GVM Predator and Prowler ('08 & Older) CAN AccuBoom Installation Manual

Connectors

3. Connect the AccuBoom cable to the sprayer boom harness:

a. Locate the boom valve connectors, which are on the left side of the

rectangular cover previously removed and re-installed.

b. Unplug the 4 pin boom cable for boom valve 1.

c. Tee in the boom connectors labeled boom 1 on the Raven AccuBoom

cable (P/N 115-0171-591).

d. Repeat for each of the other remaining boom valves.