Raven AccuBoom Installation Manual page 5

Use the following procedure to properly install the CAN AccuBoom on a
GVM Prowler or Predator sprayer:
1. Connect the AccuBoom cable to the AccuBoom node.
a. Connect the rectangular connectors from the AccuBoom
cable (P/N 115-0171-591) to the CAN AccuBoom node
(P/N 063-0172-316).
2. Mount the CAN AccuBoom node on the rear of the machine:
a. Remove the rectangular cover located on the back of the machine at
the center of the booms. This cover protects the hydraulic valves.
b. Drill three holes in the side of the cover and mount the Raven CAN
AccuBoom node (P/N 063-0172-316) on the inside of the cover.
c. Re-install the cover on the machine.
Manual # 016-0171-014
C
H A P T E R
I
N S T A L L A T I O N
3