Speaker Assembly - HP ProBook 430 G1 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Service door (see
b. Keyboard (see
c. Top cover (see
d. System board (see
Remove the speaker assembly:
1. Position the computer upright with the front toward you.
2. Remove the 2 Phillips PM2.0×6.0 shoulder screws (1) that secure the speaker assembly to the
computer.
3. Remove the speaker cables from the clips and routing path in the base enclosure (2).
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 35).
Service door on page
Keyboard on page 37)
Top cover on page 50)
System board on page
43).
71)
Spare part number
727761-001