Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Service door (see
b.
Keyboard (see
c.
Top cover (see
Remove the power button board assembly:
1.
Position the top cover upside-down.
2.
Disconnect the cable from the board (1).
3.
Remove the Phillips PM2.0×3.0 screw (2) that secures the board to the top cover.
60
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
35).
Service door on page
Keyboard on page
37)
Top cover on page
50)
43).
Spare part number
727760-001