Main Menu - HP ProBook 430 G1 Maintenance And Service Manual

Main menu

Select
System information
Security menu
Select
Administrator password
Power-on password
Diagnostics menu
Select
Primary Hard Disk Self Test
Memory Test
Using Advanced System Diagnostics
Advanced System Diagnostics allows you to run diagnostic tests to determine if the computer hardware
is functioning properly. The following diagnostic tests are available in Advanced System Diagnostics:
Start-up test—This test analyzes the main computer components that are required to start the
●
computer.
Run-in test—This test repeats the start-up test and checks for intermittent problems that the start-up
●
test does not detect.
System Tune-Up—This group of additional tests checks your computer to make sure that the main
●
components are functioning correctly. System Tune-Up runs longer and more comprehensive tests
on memory modules, hard drive SMART attributes, the hard drive surface, the battery (and battery
calibration), video memory, and the WLAN module status.
Hard disk test—This test analyzes the physical condition of the hard drive, and then checks all
●
data in every sector of the hard drive. If the test detects a damaged sector, it attempts to move the
data to a good sector.
Windows 7 – Computer Setup (BIOS) and Advanced System Diagnostics
To do this
View and change the system time and date.
●
View identification information about your computer.
●
View specification information about the processor,
●
memory size, and system BIOS.
To do this
Control access to Setup Utility.
Control access to your computer.
To do this
Run a quick or comprehensive self-test on the hard drive.
Run a diagnostic test on the system memory.
81