Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures; Battery - HP ProBook 430 G1 Maintenance And Service Manual

5 Removal and replacement
procedures for Customer Self-
Repair parts
CAUTION:
supported by the Customer Self-Repair program may void your warranty. Check your warranty to
determine if Customer Self-Repair is supported in your location.

Component replacement procedures

NOTE:
Please read and follow the procedures described here to access and replace Customer Self-
Repair parts successfully.
NOTE: Details about your computer, including model, serial number, product key, and length of
warranty, are on the service tag at the bottom of your computer. See
on page 17
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are as many as 16 screws that must be removed, replaced, or loosened when servicing Customer
Self-Repair parts. Make special note of each screw size and location during removal and replacement.

Battery

Description
4-cell, 44 WHr, 3.0 Ah Li-ion battery
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
The Customer Self-Repair program is not available in all locations. Installing a part not
for details.
Service tag and PCID label
Spare part number
708459-001
Component replacement procedures
35