Keyboard - HP ProBook 430 G1 Maintenance And Service Manual

Keyboard

NOTE: For a detailed list of available keyboards, see
Description
Keyboard
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the keyboard:
1. Position the computer upside-down with the front toward you.
2. Remove the 2 Phillips PM2.5×6.0 screws that secure the keyboard to the computer.
3.
Position the computer right-side up with the front toward you.
4.
Open the computer as far as possible.
Battery on page 35).
Sequential part number listing on page
Component replacement procedures
26.
Spare part number
727765-xx1
37