Display Assembly - HP ProBook 430 G1 Maintenance And Service Manual

Display assembly

All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2
WWAN antenna transceivers and cables.
Description
Display assembly for use in models without WWAN
Display assembly for use in models with WWAN
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
Service door (see
b. WLAN module (see
c.
WWAN module (see
d.
Keyboard (see
e.
Top cover (see
f.
Power connector cable (see
Remove the display assembly:
1.
Position the computer upside down.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 35).
Service door on page
WLAN/Bluetooth combo card on page
WWAN module on page
Keyboard on page 37)
Top cover on page 50)
Power connector cable on page
43).
48)
46)
70)
Spare part
number
727758-001
731997-001