Accepting Calls Via The Headset; Switching To Speakerphone Mode - Siemens OpenStage 30 T User Manual

Basic functions
Step by Step
+
if nec.
+
if nec.
+
if nec.
24

Accepting calls via the headset

Prerequisite: A headset is connected.
The phone rings. The
o
Press the key shown.
-
or
Set the call volume.
The headset port on the phone is preset for a
corded device and is automatically switched
when you use a cordless headset. You must
however use the "call answer" function of the
headset at least once so that the telephone can
make the corresponding setting.

Switching to speakerphone mode

People present in the room can participate in your call.
Prerequisite: You are conducting a call via the handset.
n ]
Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
-
or
Set the call volume.
U.S. mode
If your communication system is set to U.S. mode (con-
tact your service personnel), you do not have to hold
down the speaker key when replacing the handset
when switching to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
-
or
Set the call volume.
o
key flashes.