Supplies; Oil Problems - Ametek JOFRA ATC-125 Service Manual

2.2.1

Supplies

ATC-140/155/156/157
Isolated supply (refers to GND')
Non-isolated supplies (refer to GND)
ATC-250/320/650
Isolated supply (refers to GND')
Non-isolated supplies (refers to GND)
ATC-125
Refers to GND
Refers to ISOGND

2.2.2. Oil Problems

Spilling
If for any reason it is necessary to remove silicone oil spilling from the
interior or exterior of the instrument, it is advisable to use OS20 from
DOW CORNING.
OS20 is silicone oil with a viscosity low enough to dissolve the
silicone oil used for calibrating purposes.
Warning
Read the product information before use. Due to flammable
liquid, precautions might have to be taken.
Due to transport safety regulations, the liquid is not distributed by
AMETEK Denmark A/S, but is readily obtainable from your local
DOW CORNING distributor.
122770 06
+26V' :
+25 V :
VCC :
VEE :
+27V :
+26V' :
+25 V :
VCC :
VEE :
+27V :
VCC:
24V:
VEE:
ISO 26V: 26V
18-09-2007
26.6V ±1.8V
+24.6V ±1.5V
±0.25V
+5V
–20.2V ±0.9V
26.6V ±1.6V
26.6V ±1.8V
+24.6V ±1.5V
±0.25V
+5V
–20.2V ±0.9V
26.5V ±1.5V
5V ±0,5V
24V ±1V
-19V ±1V
±1V
35