Interface Specifications - Pro-face GP-4201TM Hardware Manual

Interface Specifications

Serial Interface COM1
USB Interface
Ethernet Interface
34
Asynchronous Transmission
Data Length
Stop Bit
Parity
Data Transmission Speed
Connector
Connector
USB (Type A) USB2.0 (Type
Interface A) x 1
USB (mini-B) USB2.0 (mini-
Interface B) x 1
Ethernet (LAN)
Connector
NOTE: Ethernet networks must be installed by a trained and qualified person.
When connecting the external device directly to the GP unit with an Ethernet cable,
depending on the external device, communication may not be possible.
Please connect over a network hub.
The following table describes the LED colors and status:
LED
Green lit
blinking
GP-4201TM/4301TM/4000M Hardware Manual
RS-232C / RS-422 / RS-485
7 or 8 bits
1 or 2 bits
None, odd or even
2,400...115.200 kbps, 187,500 bps
D-Sub 9 pin (plug)
Power Supply
Voltage
±
5 Vdc 5%
-
IEEE802.3i/ IEEE802.3u, 10BASE-T/100BASE-TX
Modular jack (RJ-45) x 1
Contents
Data transmission is available.
Data transmission is occurring.
Maximum Maximum
Current Transmission
Supplied Distance
200 mA 3 m (9.84 ft)
- 5 m (16.40 ft)