Regular Cleaning - Pro-face GP-4201TM Hardware Manual

Regular Cleaning

Cleaning the display
Periodic Check Points
Operation Environment
Electrical Specifications
Related Items
After-sales service
74
EQUIPMENT DAMAGE
Power off the unit before cleaning it.

Do not use hard or pointed objects to operate the touch panel.

Do not use paint thinner, organic solvents, or a strong acid compound to clean

the unit.
Failure to follow these instructions can result in equipment damage.
When the surface or the frame of the display gets dirty, soak a soft cloth in water
with a neutral detergent, wring the cloth tightly and wipe the display.
Refer to the Environmental Specifications (see page 28).
The input voltage must be within 20.4 to 28.8 Vdc.
Are all power cords and cables connected properly? Are there any loose cables?

Display Installation Nut holding the unit securely?

Are there scratches or traces of dirt on the installation gasket?

NOTE: A gasket with scratches or dirt could have lost much of its water resistance.
Be sure to change the gasket for water resistance equivalent to IP65f when
scratches or dirt become visible.
For details on after-sales service, refer to Pro-face website at
http://www.pro-face.com/trans/en/manual/1001.html.
GP-4201TM/4301TM/4000M Hardware Manual
NOTICE