Panel Cut-Out Dimensions And Installation - Pro-face GP-4201TM Hardware Manual

Installation and Wiring

Panel Cut-out Dimensions and Installation

Inserting a GP unit Without an Anti-rotation Tee
Create a panel cut-out and insert the display module of the unit into the panel from
the front. The following illustration shows the panel cut-out for a GP unit without a
tee:
Dimensions
Unit A (mm)
GP-4201TM +0
GP-4301TM 22.50
-0.30
The Material of the panel
(1) Steel sheet
(2) Glass fiber reinforced plastics (minimum GF30)
NOTE: Without the tee option, the rotating torque that can be supported by the
display module is 2.5 N•m (22.12 in-lb).
A (in) B (mm) (1) B (in) (1)
+0
0.88 1.5 to 6
-0.01
A
B (mm) (2) B (in) (2)
0.06 to 0.23 3 to 6
B
0.11 to
0.23
47