Setting Up The Unit; Select A Place For The Unit - burroughs smartsource series Installation And Operation Manual

Section 1

Setting up the Unit

Select a Place for the Unit


Indoor only

Flat, stable surface

Clearance

At front, to load and remove documents.

Above, to remove covers and access the track.

Between the sides of the unit and a monitor (if the unit is located next to a
monitor) to reduce interference with the magnetic ink character recognition
(MICR) reader inside the unit.

At rear, to:

Turn the unit on.

Connect the power cord (from the power supply), the USB interface cable,
and protect those connections.

Near PC or network connection

Near an AC power outlet

Adequate ventilation

Away from water/moisture/high humidity, heat/direct sunlight, dust

Operating temperature: 0 to 35° C (32 to 95° F)

Storage temperature: -20 to 60° C (-4 to 140° F)

Shipping temperature: -40 to 65° C (-40 to 149° F)

Operating humidity: 10% to 85% (non-condensing)

Storage humidity: 5% to 95% (non-condensing)
Notes:

SmartSource Professional and Value units draw a maximum of 48 watts of power,
and Expert units draw a maximum of 60 watts of power from a 100 to 240 VAC,
50/60 Hz outlet. All units draw 2.0 amps (maximum) of current from the included 24
VDC power supply.

Each unit must be operated with Burroughs power supply 75-0580-904 and no other.
4326 9562-007 1-1