burroughs smartsource series Installation And Operation Manual page 68

Solving Problems
Feeder (continued)
Symptom
Symptom
Automatic feeder flag does
not close. (Professional units
with automatic feeder flag.)
(cont.)
Automatic feeder flag does
not open. (Professional units
with automatic feeder flag.)
5-10
Possible Cause
Possible Cause
Dirty feeder sensor.
Defective feeder sensor.
Broken belt.
Software/hardware
synchronization.
Application; application settings.
Dirty feeder sensor.
Defective feeder sensor.
Broken belt.
Solution
Solution
Blow air with Micro-duster through
the paper path – where feeder bay
touches unit.
Return unit for service.
Return unit for service.
Close the application. Turn the unit
off and then on. Restart the
application.
Ensure that the application is
capable of (and settings are correct
for) automatic feeder flag.
Blow air with Micro-duster through
the paper path – where feeder bay
touches unit.
Return unit for service.
Return unit for service.
4326 9562-007