Detailed Cleaning Sequence; Table 3-3 Smartsource Series Starter Kit - burroughs smartsource series Installation And Operation Manual

The SmartSource Series Starter Kit (supply order number 75-0820-995) includes cleaning supplies
as well as replacement items. Table 3-3 shows the contents of the Starter Kit. (Section 4 of this
guide has complete information on all replacement items.) All of the items in this kit can be ordered
separately.
Item
Track Clearing Spatula
Image Glass Cleaning Pads, pre-
saturated with isopropyl alcohol
Ink Jet Cartridge and Ink Pad Kit
Feeder Roller and Separator Kit
Pocket Fingers

Detailed Cleaning Sequence

Follow these procedures, in the order that they are presented in this section, to clean the unit:

Turn the unit off

Remove the top inner and outer covers

Remove the front image camera removable wall

Remove the franker roller (if present) and the rear image camera removable wall

Clean the rear image camera removable wall (and, if necessary, replace the ink pad)

Remove staples, paper clips, and visible debris from the track

Blow air along the entire track (paper path) with a micro-duster

Clean the front and rear image glass and the fixed rear image camera wall

Clean ink off the endorser cartridge and cartridge housing (as needed to maintain print quality –
omit this procedure if print quality is acceptable)
4326 9562-007

Table 3-3 SmartSource Series Starter Kit

1 package of 5
1 package of 80
1 kit, includes 1 cartridge and 1 ink pad
1 kit, includes two feed rollers and
assembly
1 package of two fingers
Cleaning the Unit
Quantity
one separator
3-3