Processing Documents - Professional And Expert Units (Document Flow); Start/Stop Button (Professional And Expert Units) - burroughs smartsource series Installation And Operation Manual

Operating the Unit
Processing Documents – Professional and Expert Units
(Document Flow)
1. To initiate document processing, use either your application software user interface,
or press and release the Start/Stop button.
Note: Start/Stop Button functions are dependent on your application. Refer to your application
instructions.
2. If the unit stops after feeding 50 items, the 50 item option is active.
3. To continue running more items, remove the remaining items from the feeder bay.
Reinsert the items (and/or additional items) into the feeder bay. Press the Start/Stop
button, or use your application software interface to resume document processing.

Start/Stop Button (Professional and Expert Units)

The Start/Stop button initiates document processing. Use the Start/Stop button to:

Start or stop document flow.

Restart document flow after a track stop (center status light is amber).

Clear stopped items in the track. Hold down the Start/Stop button for three
seconds to move the stopped item(s) in the track to a pocket ("flush the track").
2-14 4326 9562-007