Need Help - burroughs smartsource series Installation And Operation Manual

Setting up the Unit
The SmartSource unit may be susceptible to "burst" or "electrical fast
transient" (EFT) noise entering the unit through the power cord. These types
of noise signals are caused by large electrical equipment (such as heating
and cooling units) connected to nearby electrical outlets. Burst or EFT noise
may cause the SmartSource to stop functioning, requiring the operator to
restart the SmartSource and its application(s).
If this occurs,

Plug the SmartSource into an electrical outlet on a different branch of the power
distribution system where large electrical equipment is not connected to nearby
outlets.

Plug the SmartSource into a line conditioning device or an uninterruptible power
source (available from Burroughs supplies).

Need Help?

Burroughs Help Desk 1-800-BURROUGHS (1-800-287-7684)

Burroughs on the worldwide web (for general product information and training videos)
www.burroughs.com

Burroughs supplies and replacement items
www.burroughsstore.com
1-2
Caution
4326 9562-007