Three Upm Plus 1 Ups; Figure 1-2. Eaton 9395P-1200 Three Upm Plus 1 Fi-Upm - Eaton Power Xpert 9395P-1200 Installation And Operation Manual

FI-UPM
Eaton Power Xpert 9395P-1200 UPS (1200 kVA, 1200 kW) Installation and Operation Manual
1.1.2

Three UPM Plus 1 UPS

The Eaton 9395P-1200 Plus 1 UPS model (1000-1200 kVA) contains three sections
(see Figure 1‐2):
S
an ISBM or an IOM section rated for a maximum of 1200 kVA (to provide future
upgradability)
S
a UPM section containing three UPMs.
S
each UPM rated for a maximum of 300 kW (900 kW total maximum for three
UPMs)
S
an FI-UPM section, which provides an additional UPM and N+1 redundancy for the
system (see paragraph 1.3.2)
ISBM SECTION
Figure 1‐2. Eaton 9395P-1200 Three UPM Plus 1 FI-UPM
NOTE Startup and operational checks must be performed by an authorized Eaton Customer Service
Engineer, or the warranty terms specified on page W-1 become void. This service is offered as part of the
sales contract for the UPS. Contact an Eaton service representative in advance (usually a two-week notice is
required) to reserve a preferred startup date.
UPM SECTION
S
P-164000500 Rev 4 www.eaton.com/powerquality
INTRODUCTION
1-3