11.2.1
Changing the GM Group Being Monitored
1. On the GM target display, press one of the soft keys
to show the key selections.
2. Press the [TG LIST] soft key.
3. Press the [CHG GP] soft key.
4. Rotate the DIAL/ENT knob to select the name of the
group you want to start monitoring, then press the
[ENTER] soft key.
The GM group being monitored changes. The GM
target display appears.
5. Press the CLEAR key to return to radio operation.
11.2.2
Transmitting a DSC Call to a Group Member
1. On the GM target display, press one of the soft keys
to show the key selections.
2. Press the [TG LIST] soft key.
3. Rotate the DIAL/ENT knob to select a member you
want to call.
4. Press the [SELECT] soft key to display the location,
distance, and bearing of the selected member.
5. Press the [CALL] soft key to transmit a DSC Individual
call to the selected member.
Page 124
GX6500E/GX6000E