Cpa - Standard Horizon QUANTUM GX6500E Owner's Manual

15. Rotate the DIAL/ENT knob to select "GPS ANT POS:",
then press the [SELECT] soft key.
16. Refer to steps 6 through 8, input the installation loca-
tion of the GPS antenna on your ship. After entering all
information, press the [FINISH] soft key. Next, select
the type of your ship.
17. Rotate the DIAL/ENT knob to select "TYPE OF
VESSEL:", then press the [SELECT] soft key.
18. Rotate the DIAL/ENT knob to select the desired
setting, then press the [ENTER] soft key.
19. To store the data, select "SAVE", then press the
[SELECT] soft key.
20. Press the CLEAR key to return to radio operation.
12.3.3

CPA

This function allows you to set the CPA (Closest Point of Approach)
distance.
 : CPA means the positions at which two moving vessels reach their closest
possible distance.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "AIS SETUP",
then press the [SELECT] soft key.
GX6500E/GX6000E
alarm

c
c
Page 133