Standard Horizon QUANTUM GX6500E Owner's Manual page 36


MENU key
Press to access MENU. For details, refer to section "8.16 OPERATION
MENU".

16/S key
Pressing this key immediately recalls channel 16 from any channel loca-
tion. Holding down this key recalls the SUB channel (The default setting is
channel 9). Pressing this key again reverts to the previous selected working
channel.
DISTRESS key

Used to send a DSC Distress Call. To send the distress call, refer to section
"10.2.1 Transmitting a DSC Distress Aleart".

Soft keys
The 3 programmable soft keys can be customized by the Setup Menu
mode described in section "15.8 SOFT KEYS". When one of the soft keys
is pressed briefly, the functions will appear above each key on the display.

▲/▼ key
These keys are used to change the operating channel. These keys on the
microphone can also be used to change the operating channel.
Press the key momentarily, the channel increases/decreases one step.
Holding the key, the channel increases/decreases continuously.
s
econDary use
 While the MENU screen is displayed, press the key to slide the on-screen
menu upward/downward.
 When in the PA or Fog mode, press the key to change the channel.

►/◄ key
Press these keys to switch the function menu.
s
econDary use
While the MENU screen is displayed, press the key to slide the on-screen
menu to the right/left side.
CLEAR key
Press this key to cancel a menu selection.
DIAL/ENT knob
While the normal screen is displayed, rotate the DIAL/ENT knob to select
your desired channel. While the MENU screen is displayed, rotate the knob
to select your desired menu item.
s
econDary use
 Press this knob to enter a selection in the MENU.
 When in the PA or Fog mode, rotate to change the channel.
Page 36 GX6500E/GX6000E