Table of Contents
Advertisement
Figure 62. Route the power cable
Step 15. Connect the power cable to the microprocessor 2 expansion board power connector from the
power paddle card.
Figure 63. Connect the power cable
Note: You might need to install the air baffle before connecting the power cable.
If you have other devices to install or remove, do so now.
Installing a microprocessor and heat sink
Use this information to install a microprocessor and heat sink.
The following notes describe the type of microprocessor that the server supports and other information that
you must consider when you install a microprocessor and heat sink:
Power cable
Power connector
.
Chapter 2
Installing optional devices
83
Advertisement
Table of Contents
Troubleshooting
