Table of Contents
Advertisement
Step 7.
Open the bezel by pressing the button on the left edge of the bezel, and rotate the left side of the
bezel away from the server.
Step 8.
Press down on the release latch on the bottom of the USB cable and light path diagnostics
assembly bracket; then, rotate the top of the mounting bracket away from the server.
Figure 153. Release latch
Step 9.
Pry the holes on the light path diagnostics assembly bracket to release the light path diagnostics
assembly.
Figure 154. Pry holes on LED
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
240
System x3500 M4 Installation and Service Guide
Latch
Light path
diagnostics assembly
Holes
Front USB cable and light path
diagnostics bracket
Advertisement
Table of Contents
Troubleshooting
