Table of Contents
Advertisement
Step 3.
Touch the static-protective package that contains the adapter to any unpainted metal surface on
the server; then, remove the adapter from the package.
Step 4.
Locate PCI slot 1 which you will install the PCI-X bracket.
Step 5.
Remove the screw that secures the expansion-slot cover.
Expansion-slot cover kit
Figure 140. Remove screw that secures the expansion-slot cover
Step 6.
Remove the expansion-slot cover kit in PCI slot 1 and save it for future use.
Step 7.
Press the PCI-X bracket firmly into PCI slot 1.
Attention: Incomplete insertion might cause damage to the system board or the adapter.
Step 8.
Make sure the latch on the side of the PCI-X bracket is secured to the rear of the server chassis.
.
Chapter 6
Removing and replacing components
227
Advertisement
Table of Contents
Troubleshooting
