Computer Requirements; User-Supplied Accessories And Consumables - GE ÄKTAprocess Site Preparation Manual

2 Site preparation overview
Mains current
up to
10 A
16 A
25 A

Computer requirements

An external computer is not required. ÄKTAprocess is provided with a built-in industrial
computer.
User-supplied accessories and
consumables
The following equipment must be supplied by the user:
Tool
13 mm wrench (or ratchet
wrench with 13 mm socket)
Electrical TX25 screwdriver or
power driver with a hexalobu-
lar TX25 bit
Safety knife
Personal Protective Equip-
ment (PPE)
as required, (e.g., gloves, lab
coats, etc.)
Buffer and waste vessels
10
Mains and neutral conductor
minimum area
2
16 AWG or 1.5 mm
2
14 AWG or 2.5 mm
2
12 AWG or 4 mm
Specification
Used for unpacking the system
Used for unpacking the system
Used for unpacking the system
Used during installation, operation and maintenance
Suitably sized vessels to allow collection of liquid for
10 minutes at maximum flow rate, and a suitably
dimensioned waste system.
ÄKTAprocess Site Preparation Guide 29-1396-55 AA