Omron NB3Q-TW_B Startup Manual page 72

The whole screen is shown below.
a
b
The configuration of the Bit State Lamp is shown below. The creating method of the Bit State Setting
components is the same as that of [1 Wait].
Bit State Lamp
The Bit State Lamp and macro file are used in this project to flash the prompt information.
1
Select [Bit State Lamp] from [PLC Parts], drag it to the design window after selecting it with a
single-click.
The attribute settings for the Bit State Lamp are:
Read Address
Function
Rate
Tag
NB-series Programmable Terminals Startup Guide Manual(V109)
a Screen b Bit State Lamp c Bit State Setting components
LW.B 10.0
Value 1 Blinking state 1, value 0 Showing state 0
5∗100 ms
Use
0: blank
1: Shutter Stopped
4 Screen Creation
4-19
4