Omron NB3Q-TW_B Startup Manual page 69

4 Screen Creation
2
Bit State Setting component for Open/Stop/Close
Function: After the component is pressed, the bits for address switch (i.e. W_bit 1.00 (Open
switch) / W_bit 1.01 (Stop switch) / W_bit 1.02 (Close switch)) will be reset after being set to 1.
The attribute settings are:
Component Name
Write Address
Bit State Setting Type
Graphics
Fixed Text
Select the "Text" button on the drawing toolbar and set the attribute of fixed text.
Bar Picture Component
The function of the Bar Picture Component is to indicate numbers of flash of headlights detected.
The times of flash are related to the current value of the ladder program counter. Up to 3 times of
flash can be counted when the maximum value of the Bar Picture is set to "3".Put fixed texts [1], [2]
and [3] above the Bar Picture as the scale to indicate times of flash.
Select [Bar Picture] from [PLC Parts], drag it to the design window after selecting it with a single-
click.
4-16
Open
W_bit 1.00 W_bit 1.01
Reset switch
Use the vector graphic: Use the vector graphic:
Up.vg (A vector graphic Middle.vg (A vector
created by user, which graphic created by user,
is an upward arrow) which is a square)
NB-series Programmable Terminals Startup Guide Manual(V109)
Stop Close
W_bit 1.02
Use the vector graphic:
Down.vg (A vector
graphic created by user,
which is an downward
arrow)