Omron NB3Q-TW_B Startup Manual page 103

6 Maintenance and Troubleshooting
21
Why does the character input as text turn up as messy codes
This may be because the text input Component or the Note Book Component involves vector
fonts. When inputting Chinese characters, the text input Component and the Note Book
Component do not support vector font, but only support Dot Matrix Font, as shown below:
22
How to skip to the target screen after inputting the password correctly
Place a "Function Key" Component on the screen, and overlay it with a "Trigger Touch"
component. Assume that the device address of the "Trigger Touch" Component is LB10 and the
Trigger Type of it is OFF ON, then select "Trigger Register" in the control settings of the
attributes of the Number Input Component for password input. Cause the LB10 to be turned ON
after setting the attribute to "After Written Notice". When the password is input correctly, it can
directly skip to the screen switched by the Function Key.
Note The function of the "Trigger Touch" Component is equivalent to clicking the area covered by the
"Trigger Touch". When the trigger condition is satisfied, the components in this area will be
executed.
6-14 NB-series Programmable Terminals Startup Guide Manual(V109)