Load on phases screen 2
This screen displays for each phase:
•
The Load active power (kW) (for RPA: total value of Parallel System).
•
The Load apparent power (kVA) (for RPA: total value of Parallel System).
Miscellaneous screen
This screen displays:
•
The temperature of the Inverter Bridge.
•
The total operating time for the UPS (in hours).
•
The total operating time for the Inverter (in hours).
Utility Faults Statistics screen
This screen displays:
•
The total number of minor Utility faults (Bypass Utility out of tolerance faults).
•
The total number of major Utility faults (Rectifier Utility out of tolerance faults).
•
The total number of detected output overloads.
UPS identification screen
This screen displays:
•
The UPS family and the power range.
•
The software version.
•
The serial number.
Modifications reserved
OPM_SGS_USM_M40_M50_1US_V020.doc
metering
LOAD ON PHASES
L1= 111.9kW
alarms
L2= 105.2kW
L3= 102.3kW
parameters
metering
MISCELLANEOUS
InvHeatsink
alarms
UpsOperTime=
InvOperTime =
parameters
metering
UTILITY FAULTS STAT.
Minor
alarms
Major
Overloads=
parameters
metering
UPS IDENTIFICATION
SG Series S1 500kVA
alarms
SW Version: x.xx
S/N: P1500-0106-0001G
parameters
139.8kVA
131.5kVA
127.9kVA
=
45 ° C
3125h
2135h
=
43210
=
11267
654
+
–
ok
+
–
ok
+
–
ok
+
–
ok
Operating Manual SG Series 400 & 500 kVA
Page 24/86