Safety Instructions - GE Digital Energy SG 400 kVA Operating Manual

Digital energy sg series 400 & 500 kva

Hide thumbs

Table Of Contents

Table of Contents

Congratulations on your choice of a SG Series Uninterruptible Power Supply (UPS). It will

help eliminate Load disturbances due to unexpected power problems.

This Manual describes the function of the UPS module, the purpose and location of the

switches, the meaning of the system events related to the front panel indication, and

provides procedures for starting and stopping the equipment.

Please refer to the accompanying Installations Guide, which describes how to prepare the

installation site, and it provides weight, dimensions and procedures for moving, installing

and connecting the UPS.

While every care has been taken to ensure the completeness and accuracy of this manual,

GE assumes no responsibility or liability for any losses or damages resulting from the use

of the information contained in this document.

NOTE !

SG Series 400 & 500 kVA is a product that needs to be installed by a licensed and

knowledgeable contractor.

We recommend that this manual be kept next to the UPS for future references.

If any problems are encountered with the procedures contained in this manual, please

contact your Service Center before you proceed.

This document shall not be copied or reproduced without the permission of GE.

Some of the information contained in this manual may be changed without notice to

reflect technical improvements.

Read the safety instructions contained on the following pages carefully before the

installation of the UPS, options and Battery System.

Pay attention to the rectangular boxes included in the text:

They contain important information and warning concerning electrical connections and

personnel safety.

Modifications reserved

OPM_SGS_USM_M40_M50_1US_V020.doc

Preface