ALLIANCE A105 ARIES Installation Operation & Maintenance page 36

Installation
4. Crimp a ring terminal to the protection conductor so it stays
fixed to the PE terminal.
5. Connect the supply cable conductors to the incoming termi-
nals (main switch [1]), marked with L1/U, (L2/V), (L3/W),
(N) and the terminal marked with PE. Refer to Figure 22 .
4
5
6
1
7
2
3
1. Main switch
2. Strain relief
3. Sag of inlet cable
4. N
5. W
6. V
7. U
Provide a sag in the cable, in front of the strain relief. This
will prevent condensed water from dripping into the machine.
Refer to Figure 22 .
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
CHM2488N_SVG
Figure 22
36 Part No. D1634ENR4