Removing And Placing The - Dürkopp Adler 1767 Service Instructions Manual

3.3.5 Removing and placing the front cover
Fig. 5: Removing and placing the front cover
(1) - Winder
(2) - Stitch adjustment lever handle
(3) - Screw
Removing the front cover
To remove the front cover:
1. Loosen the screw (3).
2. Pull off the stitch adjustment lever handle (2).
3. Switch on the winder (1).
4. Loosen the screws (5).
5. Remove the front cover (4).
Placing the front cover
To place the front cover:
1. Switch on the winder (1).
2. Place the front cover (4).
3. Tighten the screws (5).
4. Fit the stitch adjustment lever handle (2).
5. Tighten the screw (3).
18
①
② ③ ④
(4) - Front cover
(5) - Screws
Service Instructions 1767 - 00.0 - 12/2016
Working basis
⑤