Viewing Context Information - Cisco Catalyst 6500 Series Configuration Manual

Chapter 5 Managing Security Contexts
•
•
•

Viewing Context Information

From the system execution space, you can view a list of contexts including the name, class, interfaces,
and configuration file URL.
From the system execution space, view all contexts by entering the following command:
FWSM# show context [ name [detail]| count]
The detail option shows additional information. See the sample displays below for more information.
If you want to show information for a particular context, specify the name.
The count option shows the total number of contexts.
The following sample display shows three contexts:
FWSM# show context
Context Name
*admin
contexta
contextb
Total active Security Contexts: 3
Table 5-2
Table 5-2
Field
Context Name
Class
Interfaces
URL
The following sample display shows the detail option:
FWSM# show context detail
Context "admin", is ADMIN and active
Config URL: disk:/admin.cfg
Interfaces: Vlan10,22,55-57
Class: default, Flags: 0x00000057, ID: 1
Context "contexta", is active
Config URL: disk:/contexta.cfg
Interfaces: vlan10,100-101
Class: default, Flags: 0x00000055, ID: 2
The "Flags" and "ID" fields are for internal use only.
OL-6392-01
Viewing Context Information, page 5-25
Viewing Resource Allocation, page 5-26
Viewing Resource Usage, page 5-28
Class
default
gold
silver
shows each field description.
show context Fields
Description
Lists all context names. The context name with the asterisk (*) is the admin context.
The class to which the context belongs.
The VLAN interfaces assigned to the context.
The URL from which the FWSM loads the context configuration.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
Interfaces URL
Vlan10,22,55-57 disk:/admin.cfg
vlan10,100-101 disk:/contexta.cfg
vlan10,110-111 disk:/contextb.cfg
Monitoring Security Contexts
5-25