Can-Am spyder gs 2008 Operator's Manual page 26

BASIC PROCEDURES
rmr2008-029-002
FRONT SUSPENSION ADJUSTING WRENCH
rmr2008-029-003
FRONT SUSPENSION CAM ADJUSTMENT
rmr2008-030-004_c
A. Smooth adjustment (position 1)
B. Hard adjustment (position 5)
RECOMMENDED FRONT SHOCK
ADJUSTMENT
LOAD
68 kg (150 lb) rider
91 kg (200 lb) rider
68 kg (150 lb) rider
with cargo
91 kg (200 lb) rider
with cargo
Rider with
passenger and
cargo
Rear Suspension
1. Place the vehicle on a level surface.
2. Block the front wheels.
______________________
24
CAM POSITION
1, 2
3
3
4
5
3. Install a jack under the rear portion
of frame.
NOTICE
Do not jack the vehicle un-
der the rear shock.
4. Lift the rear of vehicle until the
shock absorber is fully extended.
5. Using XP-S lube (P/N 293 600 016)
or an equivalent product, lubricate
all around the shock absorber cam.
Lubricate especially near the pro-
trusions.
rmr2008-030-002_a
1. Cam
2. Protrusion
6. With a ratchet and an extension,
turn the cam adjuster to change the
position of the shock absorber cam.
rmr2008-030-003_a
1. Cam adjuster
2. Ratchet with extension