Table of Contents
Advertisement
Error messages
If a problem occurs, one of the following error massages may appear in the display window.
This message will appear If
Blank Disc
Cannot Edit
REC Error
READ Error
TOC Error
Disc Full
Error
Gp Full
Name Full
No Disc
No MD
PB Disc
Protected
Sorry
Trk Protect
GB
54
you try to play an MD with no recording on it.
you try to use the combine function on the first track on the MD.
you tried to use the Combine function on two tracks that are assigned to
different groups.
you try to add a track to a group when no groups have been defined.
you try to perform the Group In operation on a track that already belongs
to a group.
you try to perform the Group Out operation on a track that does not belong
to a group.
a problem occurred with recording. Place this unit somewhere free from
vibration and try recording again.
the MD may be very dirty or damaged. The MD may not conform to
specification (information needed for recording and editing may not be
correct). Try recording to a different MD.
the MD may be very dirty or damaged. Try recording to a different MD.
the CD may be very dirty or damaged. Clean the CD. Try recording from
a different CD.
the MD may not conform to specification (information needed for
recording and editing may not be correct). Try a different MD.
there is no more space for recording or editing or the MD. (See "System
limitations of the MD" on page 61.)
there is less than a track of free space remaining on the MD, so high-speed
recording is not possible.
you try to programme the 21st track. You can programme up to 20 tracks.
you try to record the shuffle play of the CD using synchronized recording
function.
the CD may be very dirty or damaged. Clean the CD. Try recording from
a different CD.
you try to make the player enter the timer standby mode though you have
not set the clock.
a maximum of 99 groups can be defined.
the labelling capacity of the MD has reached its limit. Each label can be
made up of up to 100 characters. You can input up to about 1,700
characters into each MD.
you try to play or record with no CD or MD in the player.
you try to play or recorded with no MD in the player (in case of
synchronized recording, etc.).
you try to record or edit on a pre-mastered MD (PB means playback).
you try to record or edit on an MD with the tab in the record-protect
position.
you try to edit, ignoring the system limitations of the MD.
you try to record or edit a track that has been already protected using other
MD recorders.
tracks that have been checked out from a computer cannot be edited using
the Erase, Divide, or Combine functions.
Advertisement
Table of Contents
