Releasing A Group Setting (Group Release Function); Adding A Track To A Group (Group In Function) - Aiwa ADN-1 Operating Instructions Manual

Releasing a group
setting
You can quickly release the group setting by
simply specifying the group name.
1
While play is stopped, press EDIT
repeatedly until "GP Release" appears
in the display. Then press
YES.ENTER.
2
Press GROUP + or GROUP – until the
desired group name appears in the
display.
3
Press YES.ENTER.
"Release OK?" appears in the display.
To cancel
Press NO.CANCEL or x.
4
Press YES.ENTER.
When "TOC Edit" disappears, the
group setting of the selected group is
released.
GB
30
(Group Release Function)
Adding a track to a
group
(Group In Function)
1
Turn off Group Mode, then play the
track you want to add to a group (page
24).
2
Press EDIT repeatedly until "GP In"
appears in the display. Then press
YES.ENTER.
3
Press GROUP + or GROUP – until the
desired group name appears in the
display.
4
Press YES.ENTER.
"GP In OK?" appears in the display.
To cancel
Press NO.CANCEL or x.
5
Press YES.ENTER.
"Complete" appears in the display for a
few seconds, and the track will be added
to the end of the group.