Moving Recorded Tracks (Move Function) - Aiwa ADN-1 Operating Instructions Manual

Moving recorded tracks
(Move Function)
You can change the order of the tracks or
groups.
After you move the track or group, the track
numbers or group numbers are renumbered
automatically.
Changing track order
Example: Moving the track C to the position
of track 1
Track number
,
Moving
Track number of the C
changes to 1
1
Play the track you want to move.
2
Press EDIT repeatedly until "Track
Move" appears in the display.
GB
36
3
Press YES.ENTER.
"Track 003 , 001?" appears in the
display, and one-track repeat play starts.
4
Press > or . to select the new
track position, and press YES.ENTER.
If you want to cancel the Move
Function at this point:
Press NO.CANCEL or x.
5
Press YES.ENTER.
"Complete" appears in the display for a
few seconds after the track is moved.
Note
If the track you want to move is assigned to a
group, the positions to which it can be moved will
be limited. Only the possible new positions will
be displayed in step 4 above.
Changing group order
Example: Moving the "JAZZ" group in front
of the "ROCK" group
Group name
ROCK
Moving
JAZZ
1
Press EDIT repeatedly until "GP Move"
appears in the display. Then press
YES.ENTER.
2
Press GROUP + or GROUP – to select
the desired group.
JAZZ ," appearsin the display.
"
3
Press YES.ENTER.
JAZZ
POP
ROCK POP