Md Editing; Creating A Group (Group Function) - Aiwa ADN-1 Operating Instructions Manual

MD Editing

Creating a group
(Group Function)
About the Group function
The Group function allows you to gather
multiple tracks recorded on a single MD into
several groups for playback or editing. This
makes it easy to, for instance, group together
all the tracks on an MD by a particular artist,
or recorded from the same CD album. You
can create up to 99 groups on a single MD.
Group Mode off
Disc
Track numbers
Group Mode on
Disc
Group 1
Track
numbers
GB
28
Number /
character buttons
Group 2 Group 3
Track Track
numbers numbers
Storing group information on a
disc
When you edit an MD using the Group
function, group information is automatically
stored on the disc as a disc name. For
example, the following character string
could be stored in the disc's name field:
Disc name field
1 Disc name: "Favorites"
2 Group name for tracks 1 through 5:
"Rock"
3 Group name for tracks 6 through 9:
"Pops"
As a result, the character string above would
be displayed as the disc name by MD players
which do not support the Group function, or
by players with the Group function turned
off.
Note
When Group Mode is set to ON, you will not be
able to display or play tracks which are not
assigned to a group.