Connection And Setup Connections - Aiwa ADN-1 Operating Instructions Manual

Connection and Setup
Connections
Insert the plugs firmly into their receptacles in the order shown in the figure below.
Connecting the cables incorrectly can cause incorrect operation.
Right speaker (rear)
1
Connect the speakers.
1 Connect the speaker cord from the
right speaker to the R OUT
connector on the rear of the left
speaker.
Right Main unit
Speaker cord
Notes
• The operating panel on the main unit slides
to the right and left. Place the speakers a
short distance from the main unit so that
the operating panel does not bump the
speakers.
• Do not place objects such as books or vases
close enough to the main unit to interfere
with the movement of the operating panel.
Left speaker (rear)
1
2 Connect the speaker cord from the
Left
Right
Notes
• Align the arrow on the speaker cord plug
with the left side of the SPEAKER OUT
connector.
• Take care not to force the plug into the
connector, or you may damage the unit.
Main unit (rear)
2
1
3
wall outlet
left speaker to the SPEAKER OUT
connector on the rear of the main
unit.
Arrow
Main unit
Speaker cord
Plug into a
Left
continued GB
5