Aiwa ADN-1 Operating Instructions Manual page 38

Labelling recordings (Name
Function) (continued)
Labelling during recording
• You can label the MDs, groups and tracks
during synchronized recording of a whole
CD (page 11) or the tracks you
programmed (page 27).
• You can only label the tracks during
synchronized recording of a single track -
REC IT (page 26).
During synchronized recording of
a whole CD or the tracks you
programmed
You can label an MD or group with up to 50
characters. You can label up to 25 tracks.
If you want to label more than 25 tracks,
label the tracks after recording (page 39).
1
During recording, press EDIT
repeatedly until "Track Name," "Disc
Name," or "GP Name" appears in the
display, and press YES.ENTER.
2
When you label a track, press > and
. to select a track number in a CD,
and press YES.ENTER.
When you label an MD or group,
proceed to step 3.
GB
38
3
Enter a character.
Cursor
1 Press the number / character buttons
to enter a character (page 40).
2 Press . to move the cursor to
rightward.
You can also use the following buttons:
Button to Function
use
>, .
Move the cursor leftward or
rightward.
CLOCK/ Delete the character marked
DELETE by the cursor.
TIMER/ Insert a space.
INSERT
4
Repeat step 3 to complete an entire
name.
5
Press YES.ENTER.
The name has been labelled on the MD,
the group or the track.
The characters you can input
• Uppercase letters: ABCD.....WXYZ
• Lowercase letters: abcd.....wxyz
• Numbers and symbols:
0123456789!"#$%&()*.;<=>?@_'+-',/:
(space)