Listening To Audio From Your Computer (Usb Speaker Function) - Aiwa ADN-1 Operating Instructions Manual

Listening to audio from
your computer
Function)
You can connect this unit to your computer,
using the supplied USB cable, and play
music stored on your computer over the
player's speakers.
1
Connect the player to your computer
using the supplied USB cable.
Supplied
USB cable
To USB connector
(USB Speaker
To USB connector
Computer
2
Press NETWORK to display "USB 5 "
in the display.
3
Install the device driver (USB
Compatible Device and USB Audio
Device) on your computer.
The necessary device driver is included
with Windows. Follow the directions
displayed on your computer screen to
install the driver.
See your computer's operating manual
for more information.
4
Play music on your computer.
The sound will be heard through the
player's speakers.
Use VOLUME + and VOLUME – to
adjust the volume.
Notes
• After the first time you connect the player as
USB speakers, you will not need to install the
driver again (step 3 above).
• Correct operation is not guaranteed if the player
is connected to the computer through a USB hub
or extension cable. Be sure to connect the player
and computer using only the supplied USB
cable.
• When not using the player with your computer,
unplug the USB cable.
• Do not unplug the USB cable or turn off the
power while using the player as USB speakers.
• Some computers may introduce noise into the
audio stream, or may not work correctly when
connected to the player.
• The USB Speaker function may not work
correctly with some computers that use a
Transmeta Crusoe processor.
GB
47