Falling Asleep To Music (Sleep Function) - Aiwa ADN-1 Operating Instructions Manual

Net md desktop audio
Table of Contents

Advertisement

Waking up to music (continued)
To check / change the waking up
timer settings
Press TIMER / INSERT, then YES.ENTER.
Each time you press YES.ENTER, the next
timer setting will be displayed. To change
the setting, display the setting you want to
change and re-enter it.
To use the player before a timer
playback starts
If you turn on the player, you can use it as
usual. Turn off the player before the preset
time.
To stop play
Press "/1 to turn off the power.
Tips
• If you made a mistake, press NO.CANCEL.
The setting entered last will be cleared. Re-enter
it.
• To exit the standby mode, press STANDBY to
make "TIMER" disappear from the display.
• The preset settings remain until you reset them.
• As long as the c indication appears in the
display, the player is in timer mode.
Note
If using the unit with powered speakers (not
supplied), turn on the speaker before using the
timer function.
GB
44
Falling asleep to music
(Sleep Function)
You can set the player to turn off
automatically after 10, 20, 30, 60, 90 and
120 minutes, allowing you to fall asleep
while listening to music.
1
Play the music source you want.
2
Press SLEEP.
"Sleep" appears in the display.
3
Press SLEEP repeatedly to select the
minutes for the sleeping timer.
The indication changes as follows:
60 t 90 t 120 t Off t 10 t 20
t 30
If 4 seconds have passed after you press
SLEEP, the minutes in the display are
entered.
The display's backlight will turn off,
and the sleep timer will start counting
down.
The preset time has passed, the player
goes off automatically.

Advertisement

Table of Contents
loading

Table of Contents