Recording The Tracks You Programmed (Synchronized Recording Of The Tracks You Programmed) - Aiwa ADN-1 Operating Instructions Manual

Recording the tracks
you programmed
(Synchronized recording of the tracks
you programmed)
You can record the tracks you programmed
up to 20 tracks.
1
Insert a recordable MD.
2
Insert the CD you want to record from.
3
Press FUNCTION until "CD" appears
in the display.
4
Press MODE until "PGM" appears in
the display.
5
Press the number / character buttons to
enter the numbers of the tracks you
want to record.
Playing order
Track number
Number/character
buttons
Total
programmed
time
6
Press REC MODE to select the desired
recording mode.
The recording mode will cycle through
SP , LP2 , LP4 as you press the
button. See page 12 for more
information.
7
Press NORM SPEED SYNCHRO REC
CD N MD.
Recording will start.
If the MD loaded into the unit already
has audio recorded on it, recording will
begin after the end of the existing audio
tracks.
If "-:- Short" is displayed
There is not enough space on the MD to
record the whole programme.
If you want to record as many of the
programmed tracks as will fit, press
YES.ENTER. To stop recording, press
NO.CANCEL.
See page 54 if any other messages are
displayed.
Notes
After you stop recording,
•
do not disconnect the
mains lead or move the player while
"TOC EDIT" is flashing in the display. If
you do so, recording may not be done properly.
• If you turn up volume too high, sound skipping
may occur.
• Programmed synchronized recording cannot be
performed using high-speed recording mode.
Tips
• If you accidentally enter an incorrect number,
press NO.CANCEL. Then enter the correct
number.
• Once the clock is set, the recording date and
time are stamped automatically (page 42).
• You can also save track names, disc name, and
group names while recording (pages 37 to 40).
GB
27