Erasing Recordings (Erase Function) - Aiwa ADN-1 Operating Instructions Manual

Erasing recordings
(Erase Function)
You can quickly erase the recorded tracks or
groups. Unlike a cassette recorder, blank
portion will not remain after erasure.
Here are three options to erase recordings:
• Erasing a single track
• Erasing all tracks on an MD
• Erasing a group
Erasing a single track
You can erase a whole track quickly. When
you erase a track, the total number of tracks
on the MD decrease by one and all tracks
following the erased one are renumbered.
1
Play the track you want to erase.
2
Press EDIT repeatedly until "Track
Erase" appears in the display.
3
Press YES.ENTER.
"Erase OK?" appears in the display, and
one-track repeat play starts.
Once you have erased a track, you
cannot recover it. Be sure to check the
contents of the track you are trying to
erase.
If you want to cancel the Erase
Function at this point:
Press NO.CANCEL or x.
GB
32
4
Press YES.ENTER.
"Complete" appears in the display for
several seconds, and the current track
will be erased.
Note
If you erase all tracks in a group, the group will be
deleted.
Erasing all tracks on an MD
You can erase the disc name, all recorded
tracks and their names at the same time.
After you have erased all tracks on the MD,
you can use it as a new MD.
1
While play is stopped, press EDIT
repeatedly until "All Erase" appears in
the display.
2
Press YES.ENTER.
"Erase OK?" appears the display.
Once you have erased tracks, you
cannot recover them. Be sure to check
the contents of the disc you are trying to
erase.
If you want to cancel the Erase
Function at this point:
Press NO.CANCEL or x.
3
Press YES.ENTER.
After "TOC Edit" disappears from the
display, "Blank Disc" appears in the
display, and all contents on the MD are
erased.