Creating Your Own Programme (Programme Play) - Aiwa ADN-1 Operating Instructions Manual

Creating your own
programme
(Programme Play)
You can arrange the playing order of up to
20 tracks on a CD or an MD.
Before you begin, make sure that the CD or
MD player is in stop mode.
1
Press MODE until "PGM" appears in
the display.
2
Press the number / character buttons to
enter the numbers of the tracks you
want to play.
(In case of CD)
Playing order
Track number
Number /
character buttons
Total
programmed
time
(In case of MD)
Playing order
Track
number
Repeat until all desired tracks are
programmed.
3
Press CD N (or MD N) to start
programme play.
Tips
• If you accidentally enter an incorrect number,
press NO.CANCEL. Then enter the correct
number.
• The program you entered remains even after
playback is finished. You can play the same
programme again by pressing CD N (or
MD N).
• Ejecting the CD will delete the CD programme;
ejecting the MD will delete the MD programme.
• During play, total programmed time cannot be
displayed.
• The Resume function (pages 10 and 17) cannot
be used during programmed play.
To cancel Programme Play
Stop playing first. Then, press MODE until
"PGM" disappears from the display.
To check the order of tracks
before play
Before starting the programme play, press
YES.ENTER.
Every time you press YES.ENTER, the track
number appears in the programmed order.
Total
programmed
time
continued
23
GB