Labelling Recordings (Name Function) - Aiwa ADN-1 Operating Instructions Manual

4
Press GROUP + or GROUP – to select
the new group position.
, ROCK" appears in the display.
"
5
Press YES.ENTER.
"GP Move OK?" appears in the display.
If you want to cancel the Move
Function at this point:
Press NO.CANCEL or x.
6
Press YES.ENTER.
When "TOC EDIT" disappears, the
group will be moved.
Note
After you stop editing, do
not disconnect the mains
lead or move the player while "TOC EDIT"
is flashing in the display. If you do so,
editing may not be done properly.
Labelling recordings
(Name Function)
Either during recording or after recording,
you can label the MDs, groups and tracks
you have recorded with letters, numbers and
symbols. You can input up to about 1,700
characters into each MD.
For more information, see the "SonicStage
Ver. 1.5" manual, and the "SonicStage Ver.
1.5 Help" electronic manual.
Number /
character buttons
x
continued
37
GB