Waking Up To Music - Aiwa ADN-1 Operating Instructions Manual

Waking up to music

You can wake up to music at a preset time.
Make sure you have set the clock (see
"Setting the clock" on page 42).
Before you begin, make sure "TIMER" is
not displayed. If displayed, press
STANDBY.
1
Prepare the music source you want to
play.
Source Do this
MD Insert an MD
CD Insert a CD
2
Press TIMER / INSERT.
"TIMER" appears in the display.
Make the following settings by
checking the indications in the display.
Number /
character
buttons
3
Press > or . until the music
source you want to play ("MD Play" or
"CD Play") appears in the display, and
press YES.ENTER.
4
Set the time you want play to begin.
1 Press the number/character buttons
to set the time.
Example: Set "6:45", press 6, 4
and 5.
2 Press YES.ENTER.
5
Set the time you want play to go off (do
as step 4).
6
Press > or . to set the volume
you want, and press YES.ENTER.
7
Press STANDBY.
"TIMER" lights up; the player enters
the standby mode.
At the preset time, the power will go on
and music will play. Then the power
will go off at the preset time, and the
player will enter the standby mode
again.
continued
GB
43