Configuring Router - Ruijie RSR10-01G Hardware Installation Manual

Chapter 4 Starting and Configuring Router
Copyright (c) 1998-2011s by Ruijie Networks.
A ll Rights Re
Decompiling or Reverse Engineering is Not Allowed.
*Apr 14 08:45:33: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432)
detected
*Apr 14 08:45:33: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 nand chip(s) found on the target.
*Apr 14 08:45:55: %7: this is a main board, it will creat factory menu.
*Apr 14 08:46:11: %SYS-5-COLDSTART: System coldstart.
Ruijie>
Ruijie>
（Such information may vary with hardware configuration or software version.）
Suggestion
4.2

Configuring Router

Before using the router, you will have to configure it as needed. For more information on
router configuration, see the related Configuration Guide and Command Reference.
4-6
se rved.
When using the router for the first time, it is recommended setting basic
parameters using the configuration function.
Installation Manual