Replacing All Toner Cartridges At The Same Time - Oki MC160 User Manual

Replacing All Toner Cartridges at the Same Time

Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
By selecting the
tridges can be replaced at the same time.
Follow the procedure described below to use the EJECT MODE.
1
With the main screen displayed, press the
MODE screen.
2
Press the
3
Press the
4
Perform the operations described in steps 6 through 15 of "Replacing a
Toner Cartridge" on page 7-4 through 7-9 to replace the magenta toner
cartridge.
5
Follow the same procedure to replace the cartridges for the cyan, black,
then yellow toners.
6
Press the S
7-10
EJECT MODE
key to select
key to select
To exit EJECT MODE, press the S
/R key to reset the machine.
TOP ESET
The machine must complete a calibration cycle (less than 2 min-
utes) after a toner cartridge has been replaced. If you open the
scanner unit or front cover before the machine is reset, the calibra-
tion stops, then starts over again after the cover is closed.
in the PRINTER MODE menu, all toner car-
and then press the E
T/C CHANGE
and then press the E
EJECT MODE
TOP
Replacing Consumables
key to display the PRINTER
NTER
NTER
/R key.
ESET
key.
key.